2) How to prevent and stop slipping on slippery Ceramic Tiles floors in wet condition?
Etching, Anti slip-Non slip solution for slippery tile floor, and tile treatment. Works very well on slippery swimming pool deck.
Anti-Slip, Non Skid Product designed and effective for: slippery ceramic tile, all kinds tile floor, glazed ceramic tile, porcelain tile, concrete floor, quarry tile, glazed bathtub, shower pan, swimming pool deck, hallways, entranceways, slippery bathroom floors, slippery kitchen floors, … Slip–Stop
Application instructions Anti slip-Non slip treatment Product #2:
Mix 8 Oz. non-slip concentrate with no less than three-quarters gallon of water and no more than one (1) gallon per 8 oz. bottle of concentrate Non Slip Floor Treatment. Apply mixed solution with a clean mop to agitate the non-slip product. Application time is 10-15 minutes. Keep evenly wet adding additional Non-Slip solution, if necessary. If desired slip-resistance is not achieved after the initial application, apply additional concentrate Rinse with water, if there are no floor drains, residue must be picked up with dry mop, sponge, or wet vacuum.
Slippery ceramic tile, porcelain tile and concrete have different textures, hard surfaces, and many of them need a different anti-slip tile treatment for slip resistance. Mix the concentrate with no less than three-quarters gallon of water and no more than 1 (one) gallon per 8oz bottle of concentrate, to get the average slip resistance, 0.60 Static Coefficient of Fraction, or more, this is required by Building & Safety, and Heath Department.
Note: Acid! Required to protect the hands, face and eyes!
Please always test a small area first, before you apply the non-slip product all over.
Anti Slip Protection for Slippery Floors: just in case if an accident happens, and your floor is slip resistant and has a Static Coefficient of Fraction is 0.60 and over, then you won’t be responsible for any slip/fall accident. According to existing law, your floor is safe.
Anti Slip Etching 8 Fl. Oz. bottle mix with (1) gallon water covers up to 400 sq. ft. $ 59.99 Free shipping USA!
Anti Slip Etching 2 Fl. Oz. bottle mix with 1/4 gallon water covers up to 100 sq. ft. $19.99 Free shipping USA!
Anti-Slip Protection: preventing slippery floor cost less than any slip/fall accident. This is the truth and fact. Bed economic situation creates a growing number of fake slip/fall accidents. Just in case if an accident happens, and your floor is slip resistant and has a Static Coefficient of Fraction is over 0.60, then you won’t be responsible for any slip/fall accident. According to existing law, your floor is safe. A slip and fall incident occurring from recklessness–in this case, unmarked wet floors–can lead to a law suit. The accident victim can sue the establishment or homeowner for medical recovery costs resulting from injuries if he can prove that his fall was due to negligence. For employers, worker’s compensation insurance usually pays these costs for employees who fall while on the job. Liability insurance usually covers a customer’s fall at a business, and on some insurance policies, homeowner’s insurance will pay for domestic slip and fall accidents. Static Coefficient of Friction (SCOF) is measured by determining the amount of force required to create the movement of an object across the surface. The Occupational Safety and Health Administration requires that walking surfaces have a static coefficient of friction of 0.6 minimum. The Americans with Disabilities Act (ADA) recommends that a level walkway have a (SCOF) of 0.6 or higher, to be considered safe. An inclined walkway or ramp, should have a (SCOF) of 0.8 or higher, to be considered safe.
#1 Anti Slip, Slip Stop, Slippery Floor, Anti Slip Treatment, Anti Slip Coating, Non Slip Treatment, treatment for slippery floor, ceramic tile, tile, tiles, prevent slippery floors, tile treatment, safety floor. » Product and Services.